Toyota Prius Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
HI all!
Just recently purchased my 2013 Prius, and I must admit I truly love this car! I decided to install an HID light conversion kit on my Prius from Juiced Hybrid and the headlights flicker randomly. I have read somewhere that i need to buy and install a relay or something like that, anyone with the similar problem please advise.
 

·
Registered
Joined
·
1 Posts
Install a relay harness with load resistors.
Disable the DRL and/or automotive lights.
Increase the fuse strength both in the car fuse box and the relay harness to 20A.
Check all the connections. Clean them if necessary.
Check the car battery. It should be delivering a minimum of 12V.
If you’re using a BI-XENON:

Install load resistors; the links are as follows: H4 (9003), H13 (9008), 9004 (HB1), 9007 (HB5).
Disable DRL and/or automotive lights.
Raise the fuses in both the car fuse box and relay harness to 20A.
Check all the connections. Clean them if necessary.
Check the car battery. It should be providing a minimum of 12V.
 
1 - 3 of 3 Posts
Top